How to Flush a Shreveport Water Heater

Posted by on Jan 17, 2014 in Hot Water Heater Repair Shreveport

Ok, so it is not a glamorous water heater maintenance job, however it does need a little cleaning up from time to time. Yes, today Hot Water Heater Repair Shreveport is going to instruct one on the best ways to eliminate a water heater. Some suggest doing so as soon as every one to 3 years, we feel it is best to do so once a year. Doing so is not a difficult or time consuming task – heck, let the children help even.

Why Flush a Shreveport Water Heater?

If it is last the advised life expectancy of the device, it ought to have some kind of routine flushing done. Doing so will undoubtedly aide in having it run as successfully as possible, which also means saving cash on the expenditure of running the darn thing. That alone ought to be a sufficient reason we feel!

In regards to water heater upkeep, flushing it will eliminate the buildup of mineral deposits that natural happens inside the water tank. If one has actually ever had loud noises, popping, gurgling, mini-explosion sounds, that is a sign that there is too much sediment inside the tank. This flushing process will help make sure that the tank heats water a lot more quietly.

Step 1. If it is an electric water heater, turn the power off in the primary electric breaker box and turn the cold water supply off. If it is a gas heater, it is ok to leave the gas on – just turn the water off. Though, turn the thermostat setting dial to the pilot setting (make a note to keep in mind exactly what it was initially set at though for later). Then, whichever faucet the water heater supplies is closest has to be opened. This is typically easier than opening the pressure relief valve, however one can do that instead.Hot Water Heater Repair Shreveport

Step 2. At the bottom of the water heater is a drain valve that a yard watering hose can be attached to. There may be a cover over it depending upon the maker. Consider turning the heat to the pilot setting a number of hours before flushing it if one desires so the water isn’t going to be as hot when it is drained. If that is not a choice that’s fine, just see to it the garden hose utilized is in excellent shape to hold up against the greater temperature water.

Run the hose outside far from your home or if the water has already cooled, one can drain the tank into containers.

Step 3. Open the water heater’s drain valve and begin draining the water. For whatever reason the drain valve is generally made of plastic, so if one has an older water heater (and one that has actually not been drained since before time started) it might stick a little. Just beware to not break the plastic (which is why it would be nice if the darn thing was NOT made of plastic).Water Heater Repair Shreveport

Once the drain valve is open, likewise open the pressure relief valve on the unit. Water will (at least it needs to if it pressure relief valve is working appropriately) flow some from it. Attempt to let is stream steady and not too fast so it stirs up the sediment in the water heater. We want the sediment to drain out the bottom from the hose.

If draining in a container, even if having the hose drain into a bucket outside of the garage or basement where the water heater is located, fill a bucket and let it sit to see if the water is clear or if there is sediment, which will generally look like sand in the bottom of the bucket. Just keep draining it until the water is clear.

Step 4. Close the drain on the bottom of the storage tank and close the pressure relief valve if it is still open.

Step 5. Turn the supply of water on again to fill the tank. As soon as it is full again, slowing open the pressure relief valve again to get some excess air out of the tank. Then, open a hot water faucet in your house to get much more air out of the system.

Step 6. Let the hot water in the bathtub run till a full stream is flowing out. Once that happens, it is ok to turn the power back on if it is an electric water heater, or reset the temperature setting for a gas water heater. Obviously, turn the bathtub faucet off. In about 20 minutes, the hot water ought to be heated up once again.

There you go! Water Heater Repair Shreveport is here to respond to any concerns you might have. Next take have a look at our article on what to do if one has no hot water.

Enhanced by Zemanta